Cost-effective Analog Ultrasonic Inspection Technology

Ultraprobe® 100


Product Description:

Allow Ultrasonic Technology to Work For You

The Ultraprobe® 100 is the perfect fit for someone looking for cost-effective analog ultrasonic inspection technology. The Ultraprobe senses high frequency sounds produced by operating equipment, leaks and electrical discharges. It then electronically translates these signals by heterodyning them down into the audible range so that a user can hear these sounds through a headset and see them as intensity increments on the Ultraprobe® “gun’s” LED meter. Heterodyning works the same as a radio in that it accurately converts the high frequency sounds down into the audible range so that they are easily recognized and understood.


The advantage of the Ultraprobe® 100 is that it is light, portable and easy to use. Plus it is an ultrasound sensing instrument. Ultrasound produces a high frequency, short wave signal. When compared with the sounds we humans can hear, the size of the sound waves are extremely small. This technology coming through the Ultraprobe® 100 provides the following advantages:

The UP100KT Ultraprobe® 100 Kit Includes:

UP100 pistol housing with LED bar graph meter, 8 position sensitivity selection, low battery indicator, scanning module, rubber focusing probe, stethoscope module, warble tone generator with battery recharger, lightweight foam lined headset, 9 volt alkaline battery (replaceable), cordura/nylon soft pack and comprehensive instruction manual.

Product Brochure Find Out More

Technical Specifications

Construction: Handheld ABS pistol type ultrasonic processor, stainless steel sensor enclosures
Circuitry: SMD/Solid State hybrid heterodyne receiver
Frequency Range: 35-45 kHz
Indicator: 10 segment LED bargraph (red)
Sensitivity Selection: 8 position precision attenuation
Power: 9 Volt Alkaline Battery
Low Battery Voltage Indicator: LED
Headset: Noise isolating type: double headset wired monophonic impedance; 16 ohms. Over 23 dB noise attenuation. Meets or exceeds ANSI specification and OSHA standards.
Probes: Scanning Module (SCM-1) Stainless Steel Unisonic (single transducer) piezo electric crystal type; Stethoscope/Contact Module (STM-1) Stainless Steel plug-in type with 5.5″ Stainless Steel Waveguide.
Rubber Focusing Probe: Shields stray ultrasonic signals & focuses detected signals.
Transmitter: Patented warble tone transmission
Response Time: 300 m. sec.
Ambient Operating Temperature Range: 32°-120°F(0°-50°C)
Relative Humidity: 10-95% non condensing at up to 86°F(30°C)
Storage Temperature: 0°-130°F (-18°-54°C)
Dimensions: 5.25″ x 2″ x 8″ (13.3cm x 5cm x 20.3cm)
Weight: 11 oz (.3kg)
Carrying Case: Nylon soft carry case with die cut foam